The wet and dry vacuum cleaner is more and more commonly used in the nowadays family. It is also very convenient to use, following steps for your reference.
- Unplug the power cord, check whether the power cord is damaged or not. Is there any place for electric leakage? If everything is well, you can install the needle base, washing pad or washing brush at the bottom of the body. When washing smooth ground, the needle base should be installed tight cleaning pad. A brush should be installed on the ground that is not smooth, and the handle should be adjusted to an angle that is easy for you to operate.
- Check that the switch is off, put the plug into the socket.
- Put the power cord on the back, hold the handle with your hands, and then open the switch. The brush disk and needle disk are in the same level on the ground now. Grasp the joystick to control the machine to move left and right, and the brush disk starts to work.
- During the period of working, don’t force the wet and dry vacuum cleaner to move around only depend on your own arms, the wet and dry vacuum cleaner will moves by itself. We just follow the handle and move with the machine. The motor drives brush head, clean the ground, if you put some detergent, it will be more efficient. Water tank – individual clean water tank is separate from dirty water tank. The clean water will clean the floor, and the sewage on the ground is sucked into the sewage tank and taken away.
